Polymer Cementitious Concrete Overlays
Cementitious, polymer-modified concrete overlay systems for Phoenix and Scottsdale exterior surfaces, patios, walkways, entries, and commercial pedestrian areas.
See finished work for this service
A closer look at Polymer Cementitious Concrete Overlays.
Compare the finished surface, texture, and installation details before you choose a system for your space.
This is the short list of finished work for this system. Open the full project gallery when you want more views, details, or before-and-after proof.
Is Polymer Cementitious Concrete Overlays right for your space?
Use this quick fit check before reviewing the process and estimate details.
A good fit for
- Spalled, pitted, or sun-damaged driveways, patios, and entries
- Sound slabs that need a new wear surface instead of replacement
- Decorative upgrades — overlays, microtopping, stain, and seal
- Paver and flagstone surfaces due for cleaning and resealing
Consider another system for
- Structurally failing slabs with deep settlement or heaving
- Sites where drainage problems must be corrected first
- Surfaces better served by a film coating alone, like interior garages
What customers say about the finished work
"We love our garage floor! The workmanship was excellent with clear communication and follow through. I highly recommend Carefree Stone."
"We have had our Kool Deck resurfaced six times in 14 years. Each time, the company made it worse. Puddles formed when..."
What can go wrong without the right system
Sun and monsoon damage
Arizona UV, heat cycles, and monsoon moisture break down unprotected surfaces, causing spalling, pitting, and fading.
Cheap resurfacing jobs
Thin patch products applied without mechanical prep peel and telegraph old damage back through. A proper overlay system bonds to a prepared slab.
Unaddressed cracks
Cracks that are skimmed over instead of routed and repaired reappear in the new surface. Repair scope is part of every honest resurfacing quote.
What's included
- Extreme bond strength to existing concrete
- Restores cracked and spalled surfaces
- Custom textures (knockdown, broom, stamped)
- Reduces concrete surface temperatures
How installation works
- 01
Abrasive Washing & Prep
Pressure washing and mechanical profiling to remove dirt and open the concrete pores.
- 02
Fracture Stitching
Chasing and filling cracks with high-tensile epoxy and concrete stitching staples to stabilize the concrete base.
- 03
Polymer Base Coat
Applying a high-bond polymer primer and slurry base coat to lock in the slab and create a uniform layer.
- 04
Textured Finish & Sealer
Spraying or troweling the decorative knockdown overlay, followed by UV-stable tinted acrylic sealers.
Plan your project.
We'll review the decisions that affect your project. The written proposal controls the final scope.
Timing
Access, surface condition, weather, and cure windows shape the schedule.
Maintenance
Care is matched to the installed finish, traffic, and exposure.
Appearance
Color, gloss, texture, and traction are selected for how the space is used.
Warranty
Coverage follows the system, substrate, preparation, and written proposal.
What we'll review for your estimate
We'll review the slab, preparation, system, access, and when you need the space back in use.
- Square footage of the surface
- Depth of damage and the repair scope required
- System choice — overlay, microtopping, stain and seal
- Finish, texture, and color selection
- Removal or tear-off of failed previous work